Water Proofing Blister Repairs

Best way to repair waterproofing blisters on your buildings roof. Quick guide to using Polyprene caulk to prevent leaks and stop water damage to the building.

Waterproofing blisters on a building’s roof can be a significant concern, especially in areas with extreme weather conditions. These blisters can lead to leaks and extensive water damage if not promptly addressed. This guide aims to provide a quick and effective solution for repairing waterproofing blisters using Polyprene caulk, a material well-suited for stopping leaks and preventing further damage.

Materials Needed

1. Polyprene Caulk
2. Caulking Gun
3. Roofing Knife
4. Cleaning Solvent
5. Paint Scraper or Putty Knife
6. Gloves
7. Safety Glasses
8. Measuring Tape
9. Ladder

Safety First

• Always follow safety procedures when climbing a ladder and working on a roof.
• Wear gloves and safety glasses to protect your hands and eyes.

Steps to Repair Waterproofing Blisters

Step 1: Inspection and Preparation

1. Inspect the Roof: Carefully climb onto the roof and locate the waterproofing blisters.
2. Clean the Area: Use a cleaning solvent to remove any grime or dirt around the blister. Let the area dry completely.

Step 2: Removing the Blister

1. Cut the Blister: Using a roofing knife, carefully cut open the blister but do not remove the cut material completely.
2. Dry the Area: Make sure there is no moisture under the cut material.

Step 3: Application of Polyprene Caulk

1. Load the Caulking Gun: Insert the Polyprene caulk tube into the caulking gun.
2. Apply the Caulk: Generously apply the Polyprene caulk under the cut material and fill the blister cavity. Make sure to also apply caulk around the edges of the cut.
3. Seal the Cut: Flatten the cut material back into place, ensuring it adheres to the newly-applied caulk.

Step 4: Final Touches

1. Additional Caulk Layer: Apply a thin layer of Polyprene caulk over the sealed blister area.
2. Smooth the Caulk: Using a paint scraper or a putty knife, smooth out the caulk layer for a more finished look.

Conclusion

Polyprene caulk is an effective solution for repairing waterproofing blisters on your building’s roof. Always remember to follow safety precautions and consult professionals if the damage is extensive. By addressing these issues promptly, you can prevent leaks and stop water damage, thereby possibly saving thousands in repair costs and potential insurance claims down the line.